Tuesday, July 28, 2009


I added pictures to the "Firewall Forward", "Carb Inlet" and "Center Console".

Tuesday, June 23, 2009

Oil Seperator Attached to Engine

A little tight but manageable.
Fits nicely

Mounted Oil seperator
Mounting Plate
Stand-offs 2.5" long

Wednesday, June 3, 2009

Firewall Forward

Mounted MGL Avionics RDAC engine monitor.

Lots of clearance over the 60 amp Cessna one.

Install B&C 30 amp alternator.

Posssible oil seperator location if electronic ignition is used.

It works very well for a one person job now.

Borrowed an engine hoist.

Friday, May 8, 2009

Center Console

Installed the Centroid fuel level in same location where site tube was.

Finnaly got it glassed with 3 ply of bi-directional glass.

Instrument Panel

Looking at using Acer computer running Flightsoft software.

Wednesday, April 8, 2009

Main tank mod for fuel probe

I removed sight tube for electronic fuel level probe.

Tuesday, April 7, 2009

Carb Inlet

Air inlet extention.

Some grinding on the mixture bracket and all will be good.
Tight but managable.

Mixture bracket and carb elbow looking good.

Still some clearance

Some trimming of flanged and its done.

Neck points straight to inlet.

Late night crew.

Jeff starting to shape the elbow.

Monday, March 30, 2009

Mixture Cable Bracket

Tight with exhaust but maybe O.K.
The shape is correct but need some gussets to stiffen it up.
I think .063" aluminum is a little too thin.