Sunday, February 28, 2010

Forward Progress

MGL Voyager and Garmin GTX-327 Transponder.
Trigger mounting plate - done!
Trigger mounting - concentric and flat.
Side mounting holes.
Top mounting holes.
Ignition mounted with 1/2" gap.
Ignition mounted with connector clearance.
Tap guide.
Drill guide.
Dual LSE elctronic ignition arrived.
CAD model of my panel.
Removing flox from around ram air tube.
Magneto Box with Ceramic sheeting.Magneto Box with fireproofing paint.
Trim wheel shaft installed.
Trim Wheel.
Joy stick cover fabrication.
Spinner Fitting.